Product Details:
|
Model: | HZ-7004B | Test Temperature: | -60℃--0℃ |
---|---|---|---|
Impact Speed: | 2m/s ±0.2m/s | Temperature Fluctuation: | <±0.5℃ |
Distance From The Center Of The Impactor To The Lower End Of The Holder: | 11±0.5mm | Shape Size (length * Width * Height): | 1100*800*800mm Exposed Cylinder Fitting Height:500 |
Highlight: | Vulcanized Rubber Testing Machine,2m/s Rubber Testing Machine,Antirust Low Temperature Brittleness Tester |
HZ-7004B Vulcanized Rubber Low Temperature Brittleness Tester
Low Temperature Brittleness Tester Equipment Overview:
HZ-7004 touch screen vulcanized rubber low temperature brittleness tester is to determine the highest temperature, that is, brittle temperature, when the vulcanized rubber specimen is damaged by impact under specified conditions. The performance of non-rigid plastics and other elastic materials under low temperature conditions can be compared. The brittleness temperature and low temperature properties of different rubber materials or formulations can be measured. Therefore, it is necessary to examine the quality of materials and their products and control the production process.
Low Temperature Brittleness Tester Application Industry:
Rubber Industry
Low Temperature Brittleness Tester Technical parameter:
Model |
HZ-7004B |
Test Temperature |
-60℃--0℃ |
Impact Speed |
2m/s ±0.2m/s |
temperature fluctuation |
<±0.5℃ |
Distance from the center of the impactor to the lower end of the holder |
11±0.5mm |
Shape size (length * width * height) |
1100*800*800mm |
Inner Chamber size (long * width * height) |
300*250*400mm |
Low Temperature Brittleness Tester Test Standard:
Low Temperature Brittleness Tester Device Principles :
The equipment pushes the specimen into the freezing medium through the main cylinder driving holder, and after holding it for a certain time, lift the holder, then the secondary cylinder controls the impact process, observes the damage degree of the sample, and passes the repeated test. The minimum temperature of at least two samples without failure and the maximum temperature of at least one sample are determined. If the difference between the two results is not greater than 1 ℃, the test is finished.
Low Temperature Brittleness Tester Detailed Images
Contact Person: liang
Tel: 8613711888650
Fax: 86--13827265866