Universal Testing Equipment for Textile, Rubber, Plastics etc. 5KN option Included Data Analysis Software
Electronic Laboratory Universal Tensile Testing Machine Manufacturer for fastener
Universal Testing Machine Equipment summary:
It is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control, This series of machine using single-space structure, operational space at the bottom, it is mainly applied to test non-metallic and metallic material which the load is less than 5KN, it has the parameters, such as stress, strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others.
Universal Testing Machine Main Function
This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons, thread, spring, wood, medicine packaging materials, tapes etc.
1.Adopt delta servo motor, the beam moves up and down to test the load through the transmission.
2.The whole control system is safe and high reliability.
3.Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation, testing speed and testing curves.
4.Microcomputer for data processing and analysis, testing results can be saved automatically, testingcurve can be transferred out after the test, you can know the testing process through the testing curve, or compare with others curves, or amplify the curve.
5.The testing software of the Window, with strong processed capabilities of data and graphics
6.Has limit protection, overload protection, emergency stop and other safe protective functions.
|
Model
|
|
|
Maximum load
|
10N,20N,50N,100N,200N, 500N, 1KN,3KN,5KN option
|
|
Accurate grade
|
1grade/0.5 grade
|
|
Effective measuring range
|
0.2%~100%/0.4%~100%
|
|
Measuring accuracy
|
The value ±1%/ the value ±0.5%
|
|
Tester resolution
|
Max load 1/200000, constant the resolution
|
|
Load sensor
|
Chinese brand, (Transell brand)USA,Tecics(Germany),Optional
|
|
Effective tensile stroke
|
800-1000mm
|
|
Range of testing speed
|
0.01~500mm/min (Special can customize to 0.01-1000mm/min)
|
|
Accuracy of displacement
|
Tolerance: ±0.5%/ tolerance: ±0.2%
|
|
safety
|
Electronic-limit protection
|
|
Platform moving device
|
Fast /slow two speeds to control,can jog
|
|
Overload protection
|
Overload 10%, automatic protection
|
|
Grips
|
Tensile grip, Compression, Peel grip, Bending grip, Optional
|
|
Machine size
|
45x55x180cm (length*width*height)
|
|
Motor
|
Delta AC servo motor and drive
|
|
Power supply
|
220V, 50HZ
|
|
power
|
400W
|
|
weight
|
About 175 KG
|
|
Unit
|
KG,N,LB, TON can be exchanged.
|
Your message must be between 20-3,000 characters!
